Dimmock
Dimmock's made vine jugs very similar to those from the Church Works. They also had a fractional numbering system under 1/ that can easily be confused with Alcock, and under 2/ that can be confused with Ridgway, Bedford Works. Also it has become clear that many more factories used fractional numbering systems than was at first thought, which makes errors of attribution very easy to make.
Much of the pattern information on the earlier pattern numbers on this page has come from the Flow Blue International Collectors Club Pattern Identification, or FBICC PID for short, to which due acknowledgement is given.
Very little research appears to have been done on this factory, so, apart from those items clearly marked, the listings here can only be said to be tentative.
Unknown Pattern 1 "Japan Stone Ware"
Pattern 1/692 "Bamboo Kaolin Ware"
"Nankin Stone Ware"
This print is very similar to the John Ridgway "Napier" print but has detail differences.
I have been informed that this mark and print has been attributed to H & R Daniel in a recent book on Daniel Earthenwares. Whilst accepting that there can always be challenges to attributions I would point out that the mark appears identical, excepting the name, to that on the "Japan Stone Ware" print below. The "Japan Stone Ware" print has been observed with the pattern number 1/117 which fits the Dimmock numbering system, and does not fit the Daniel system. I find it difficult to believe that two virtually identical marks could come from two different factories, but I would be very happy to receive photos proving otherwise.
The tureen stand or warming plate (minus tank) is 258mm in diameter. Earthenware.






Photos © Richard Valentine 2023
"Nankin Kaolin Ware"
The tea cup and saucer. Earthenware.

The saucer is 146mm in diameter. Earthenware.



The tea cup is 60mm tall. Earthenware.






Photos © Robert Hawker 2026
"Rhine Kaolin Ware"
The dinner plate is 260mm in diameter. Earthenware.




The registration diamond is for 7th May 1844, Parcel 4, registered by Thos. Dimmock & Co., Shelton.
Photos © Bonnie Jean Seiwell ~ Lady in Decadence 2023
Unknown Pattern 1 "Japan Stone Ware"
This has no pattern number but one would have been allocated. The nearest match known is a plate of Pattern 1/117 which has the same print and red ground but slightly different decoration. One assumes the pattern number of the jug to have been in roughly the same area. Hopefully a numbered example will one day come to light.
The vine jug with Britannia Metal lid is 190mm tall. Earthenware.










Photos © Jackie Casey 2022
Pattern 1/23 'Chinese'
Examples of this print have been noted with the name 'Chinese' in the backstamp.
The vase is 286mm tall, 165mm across the top and 108mm across the base. Earthenware.







Photos © Jackie Casey 2023
Pattern 1/592
This was originally thought to be by Samuel Alcock & Co., but a comparison with the identical mouldings on the Pattern 1/621 jug below, which has a known Dimmock print, means this jug is also by Dimmock.
The vine jug is 254mm tall. Earthenware.








Photos © Margie Myhr 2022
Pattern 1/621
This print is referred to as Reeds & Flowers by collectors and researchers. Dimmock's own name for it is not known.
The vine jug is 254mm tall. Earthenware.










Photos © Jackie Casey 2022
Pattern 1/692 "Bamboo Kaolin Ware"
The octagonal mask jug is 184mm tall. Earthenware.




The impressed "12" is probably a size indicator.

Photos © Margie Myhr 2024
Pattern 1/1410
The plate. Earthenware.




Note the impressed Thomas Dimmock monogram.
Photos © judith.2064 ~ eBay 2024
Pattern 1/1501 "Argyll"
The dessert plate is 238mm in diameter. Earthenware.





Note the impressed Thomas Dimmock monogram.
Photos © Tucker's Tabletop Treasures 2023
Pattern [1/]1619
The pattern number on the second jar does not have the 1/ prefix. I have seen a third example which also does not have the 1/. I suspect that much as Francis Morley dropped the 3/, Dimmock's may have dropped the 1/ in the last period of the factory's life.
The jar with EPNS lid & handle is 108mm wide, 127mm tall to the top of the lid finial, and 165mm tall with the lid extended. Earthenware.










The jar with EPNS lid & handle is 146mm wide, 165mm tall to the top of the lid finial, and 219mm tall with the handle extended.








The "J D & Co." monogram links the jar firmly to the factory.
Photos © Bonnie Jean Seiwell ~ Lady in Decadence 2023
Pattern 1/2539
The print appears to be Dimmock's version of the Indian Tree print.
The short comport. Earthenware.







The pattern number could be 1/7539, but I have assumed 1/2539. Further examples will confirm either way, if they appear.
Note the impressed Thomas Dimmock monogram.
Photos © Ashley Saenz ~ greeneyedhistorian 2023
Pattern 1/3870 "Indian"
The dinner plate is 267mm in diameter. Earthenware.





Note the impressed Thomas Dimmock monogram.
Photos © Robert Hawker 2026
Pattern 2/177
This jug has the same shape as the 2/5538 example below, so is included here. Other manufacturers made similar shape jugs so the attribution can only be tentative.
The jug. Earthenware.







Photos © Aldona Taras 2021
Pattern 2/5538 tea
This teapot was originally listed as Ridgway, Bedford Works, but I was unhappy with the attribution as I recognised neither the shape nor the prints. The appearance of a pink mug with the same prints attributed to Till, however, caused me to reattribute the teapot to that factory as two of the prints on the mug and the teapot are basically the same. The discovery of the marked cabaret tray caused a second reattribution to Dimmock.
The teapot (minus lid) is 127mm tall to top of handle. Earthenware.








Photos © Paul S Fawcett 2023
The tray for a cabaret set is 290mm in diameter. Earthenware.








This is the impressed mark of John Dimmock & Co.
Photos © Andrew Wilkin 2023
Pattern 2/5538 jug
This jug has the same pattern number and Chinese style decoration as the above teapot. So we have another shape for Dimmock.
The jug is 213mm tall. Earthenware.











Photos © Andrew Wilkin 2023
Pattern 2/6223
This teapot is identical in shape to the 2/5538 teapot above so must therefore also be by Dimmock. The prints used are new to me and I hope will enable further attributions.
The teapot is 135mm tall. Earthenware.








Photos © Cooper Barrington LLP 2023
