Church Works and Bedford Works
'Dublin' Shape and 'York' Shape Tea and Breakfast Wares

For a long time wares made by the Ridgways at the Bedford Works were thought to have been made by Dudson. There was clearly co–operation between the two factories and it is difficult to establish exactly how far that went. There have, however, been doubts expressed as to whether a factory the size of Hope Street with its two tiny bottle ovens (the large oven was not completed until 1872) could have been capable of manufacturing the wide range of wares attributed to them. Tony Curnock was the first to express the opinion that the ebony wares attributed to Dudson were made by Ridgway at the Bedford Works. These wares share many shapes with the jasper wares. I became convinced of the matter after reading Jewitt's The Ceramic Art of Great Britain (1878). Volume 2 where he describes the products of both the Bedford Works and Dudson's Hope Street Works. Jewitt states that both factories produced moulded ware and mosaic ware, but only the Bedford Works produced jasper ware and jet ware, and he praises both wares with effusive language. Whilst the comment on jet or ebony ware was to be expected after Tony Curnock's article, that on jasper ware was not. All jasper wares were, up to then, thought to have been produced at Hope Street. It now seems clear that Dudson made no jasper ware between the 1830s and March 1882. It appears that, after James Dudson completed the construction of the large bottle oven in 1872, he was looking for additional wares to produce. It is on record that he experimented with simplifying the production of mosaic and jasper wares. The Ridgways must have agreed to allow him to produce some mosaic ware from the mid–1870s and jasper ware from March 1882. Audrey Dudson has admitted that Dudson only started to advertise jasper wares in 1882. Both factories continued in production (presumably with some sort of joint marketing agreement), and the Ridgways seem to have withdrawn from the market around 1891, leaving Dudson in sole production. Only Ridgway production will be found listed here. Dudson manufactured wares will be found in the Dudson section of 'Other Manufacturers'.

 

There seem to be two variants of this shape, one with a round topped handle, the 'Dublin' shape, and one with a pinched handle, the 'York' shape.

 

Edward John Ridgway
E. J. Ridgway & Son

'Dublin' shape

Patent Mosaic Patterns

Pattern 23

Pattern 104

Incised Number Jasperware Series

Pattern 267

Pattern 406

Pattern 1442

Painted Number Series

Pattern 9684 'Penang'

Pattern 9766 'Penang'

'York' shape

Painted Number Series

Pattern 8298

Pattern 9684 "Penang"

Pattern 2/1189 'Penang'

Pattern 3/1189 "Penang"

 

'Dublin' shape

 

Patent Mosaic Patterns

 

Pattern 23

On the face of it the only thing linking this coffee pot to the 'Dublin' shape tea wares is the shape of the lid. Nonetheless it is so marked.

The coffee pot is 229mm lip to handle, 140mm wide, and 235mm tall. Grey stoneware with white and black "Patent Mosaic" bands.

Pattern 23 coffee pot left side

Pattern 23 coffee pot spout side

Pattern 23 coffee pot right side

Pattern 23 coffee pot handle side

Pattern 23 coffee pot top

Pattern 23 coffee pot lid base

Pattern 23 coffee pot body top

Pattern 23 coffee pot right side lid off

Pattern 23 coffee pot base

Pattern 23 coffee pot marks

Photos © Eron Johnson Antiques 2022

 

Top of Page

Return to Bedford Works patterns

 

Pattern 104

The sugar box is 114mm tall. White stoneware with pale blue "Patent Mosaic" bands.

Pattern 104 sugar box side

Pattern 104 sugar box lid top

Pattern 104 sugar box base

Pattern 104 sugar box marks

Photos © Paul S Fawcett 2022

 

Top of Page

Return to Bedford Works patterns

 

Incised Number Series

 

Pattern 267

The teapot is 150mm spot to handle and 130mm tall. White stoneware covered with blue slip and white sprigs.

Pattern 267 teapot left side

Pattern 267 teapot right side

Pattern 267 teapot base

Pattern 267 teapot marks

The impressed "36" is a size marker. The "x" is probably a tally mark.

Photos © Joan Cowan 2021

 

Top of Page

Return to Bedford Works patterns

 

Pattern 406

This creamer matches, and was bought with, the Pattern 267 teapot above. It is therefore curious that it has a different pattern number. It is in rather a sad state, but still serves as a useful example of the pattern and shape.

The creamer is 110mm handle to spout and 80mm tall. White stoneware covered with blue slip and white sprigs.

Pattern 406 creamer left side

Pattern 406 creamer right side

Pattern 406 creamer base

Pattern 406 creamer left side

The impressed "36" is a size marker. The "x" is probably a tally mark.

Photos © Joan Cowan 2021

 

Top of Page

Return to Bedford Works patterns

 

Pattern 1442

The teapot is 190mm handle to spout. Brown stoneware with white vine leaf & grape sprigging.

Pattern 1442 teapot right side

Pattern 1442 teapot base

Pattern 1442 teapot impressed marks

The impressed date code "6/78" is for June 1878. The "24" is probably a size marker. "DUBLIN" is almost certainly the shape name. The ":" is probably a moulder's tally mark.

Photos © Joan Cowan 2021

The sugar box (minus lid) is 100mm tall. Brown stoneware with white vine leaf & grape sprigging.

Pattern 1442 sugar box side

Pattern 1442 sugar box base

The impressed date code "6/78" is for June 1878. The "30" is probably a size marker. The other mark is probably a moulder's tally mark.

Photos © Joan Cowan 2022

 

Top of Page

Return to Bedford Works patterns

 

Painted Number Series

 

Pattern 9684 'Penang'

This pattern has appeared in both shapes.

The teapot. Earthenware.

Pattern 9684 teapot left side

Pattern 9684 teapot base

Pattern 9684 teapot pattern number

Photos © Jonathan Dutton 2021

 

Top of Page

Return to Church Works patterns

 

Pattern 9766 'Penang'

What exactly the difference is between patterns 9684 and 9766 remains a mystery.

This pattern also appears on a snake–handled jug.

The teapot is approximately 170mm tall. Earthenware.

Pattern 9766 teapot left side

Pattern 9766 teapot handle side

Pattern 9766 teapot right side

Pattern 9766 teapot right side detail

Pattern 9766 teapot top

Pattern 9766 teapot base

Pattern 9766 teapot marks

Photos © Patricia ONeill 2021

 

Top of Page

Return to Church Works patterns

 

'York' shape

 

Painted Number Series

 

Pattern 8298

The teapot is 140mm tall not including finial, and 180mm spout to handle. Earthenware.

Pattern 8298 teapot left side

Pattern 8298 teapot handle side

Pattern 8298 teapot right side

Pattern 8298 teapot top

Pattern 8298 teapot base

Pattern 8298 teapot pattern number

Pattern 8298 teapot impressed marks

The impressed "30" is a size marker indication a small teapot. The rest appear to be tally marks. The one on the far left has been noted on other Ridgway pieces, including a 'Mosaic' example.

Photos © Michelle Stein Baceda 2021

 

Top of Page

Return to Church Works patterns

 

Pattern 9684 "Penang"

This pattern has appeared in both shapes.

The teapot is approximately 195mm tall. Earthenware.

Pattern 9684 teapot 2 left side

Pattern 9684 teapot 2 right side detail

Pattern 9684 teapot 2 handle detail

Pattern 9684 teapot 2 spout detail

Pattern 9684 teapot 2 lid top

Pattern 9684 teapot 2 base

Pattern 9684 teapot 2 marks

The impressed date code reads "11/78" for November 1878. "18" is possibly a size mark. The other is probably a moulder's tally mark.

Photos © Patricia ONeill 2021

 

Top of Page

Return to Church Works patterns

 

Pattern 2/1189 'Penang'

2/1189 and 3/1189 appear to be the same pattern, so probably one of the two has been misnumbered.

The tip of the spout has been damaged and repaired with a metal sleeve.

The teapot is 178mm tall and 222mm handle to spout. Earthenware.

Pattern 2/1189 teapot left side

Pattern 2/1189 teapot spout side

Pattern 2/1189 teapot spout side detail

Pattern 2/1189 teapot right side

Pattern 2/1189 teapot handle side

Pattern 2/1189 teapot handle side detail

Pattern 2/1189 teapot top

Pattern 2/1189 teapot lid top

Pattern 2/1189 teapot lid side

Pattern 2/1189 teapot lid base

Pattern 2/1189 teapot filter detail

Pattern 2/1189 teapot base

Pattern 2/1189 teapot marks

This is the only example I have seen with the shape name impressed.
The impressed "B" is probably a moulder's tally mark.

Photos © Trina Taylor Hiemstra 2026

 

Top of Page

Return to Church Works patterns

 

Pattern 3/1189 "Penang"

2/1189 and 3/1189 appear to be the same pattern, so probably one of the two has been misnumbered.

The teapot. Earthenware.

Pattern 3/1189 teapot left side

Pattern 3/1189 teapot base

Pattern 3/1189 teapot marks

Photos © Jonathan Dutton 2021

 

Top of Page

Return to Bedford Works patterns