Bell Works
Rosette moulded wares

Pattern 471

Pattern 472

Pattern 482

 

Pattern 471

Drab coloured earthenware body.

The 10 inch pillar candlstick is 242mm high, 114mm diameter at the base, and the top ring is 67mm in diameter.

Pattern 471 10in pillar candlestick side

Pattern 471 10in pillar candlestick base

Pattern 471 10in pillar candlestick padmark

 

The 7 inch pillar candlstick is 160mm high, 90mm diameter at the base, and the top ring is 53mm in diameter.

Pattern 471 7in pillar candlestick side

Pattern 471 7in pillar candlestick base

Pattern 471 7in pillar candlestick padmark

Photos © Angela Grant 2018

 

Top of Page

Return to Bell Works patterns

 

Pattern 472

White porcelainised body.

The mug is 84mm high, 86mm diameter and has a handle protruding 32mm.

Pattern 472 mug left side

Pattern 472 mug right side

Pattern 472 mug handle side

Pattern 472 mug top

Pattern 472 mug bottom

Pattern 472 mug pad mark

The 6 inch jug is 154mm tall, 161mm lip to handle, and 119mm broad.

Pattern 472 6in jug top

Pattern 472 6in jug side

Pattern 472 6in jug lip

Pattern 472 6in jug handle

Pattern 472 6in jug base

Pattern 472 6in jug padmark

The 5 inch jug is 129mm tall, 129mm lip to handle, and 95mm broad.

Pattern 472 5in jug top

Pattern 472 5in jug side

Pattern 472 5in jug lip

Pattern 472 5in jug handle

Pattern 472 5in jug base

Pattern 472 jug padmark

The 10 inch pillar candlestick is 242mm high, 118mm diameter at the base, and the top ring is 65mm in diameter.

Pattern 472 10in pillar candlestick side

Pattern 472 10in pillar candlestick base

Pattern 472 10in pillar candlestick padmark and impressed size

The 9 inch pillar candlestick is 224mm high, 112mm diameter at the base, and the top ring is 62mm in diameter.
Some staining.

Pattern 472 9in pillar candlestick side

Pattern 472 9in pillar candlestick base

Pattern 472 9in pillar candlestick padmark and impressed size

Photos © Angela Grant 2018

 

Top of Page

Return to Bell Works patterns

 

Pattern 482

Lilac coloured earthenware body.

The chamber stick is 50mm high, 115mm diameter, and the handle protrudes 28mm.
Some stress cracking.

Pattern 482 chamber stick top

Pattern 482 chamber stick top detail

Detail showing slot in taper holder where pin could be inserted to remove stub.

Pattern 482 chamber stick side

Pattern 482 chamber stick handle

Pattern 482 chamber stick base

Pattern 482 chamber stick padmark

Photos © Angela Grant 2018

 

Top of Page

Return to Bell Works patterns

 

Valid XHTML 1.0 Transitional